2001 dodge durangoWork is essential to have brake pads on 2004 Dodge Ram. These are devices that help stop the truck. When you hit the brake, the caliper cylinder compresses the pads against the rotor. Pads against the rotor slip with the ram on a high. If the brake pads are worn, must be replaced. Dodge Ram Park is on a level surface and that the emergency brakes on. Open the hood. The clamp cylinder is compressed, so do not blow a line break or brake fluid reservoir, unscrew the safety cap. Use a jack to lift the front of his Dodge Ram and make sure they are seated securely into the sockets.
2001 dodge dakotaTake the front wheel driver's side using a spanner. Take the caliper brake rotor. Use a socket wrench to remove the fixing screws. Then slide into the top of the rotor. For now, hang from the structure with a rubber band. Using your hands, remove the brake pads that are within the clip. Put a C-clamp on the inside of the clamp and compress the caliper cylinder rotating clockwise. This then will allow more space to insert the new brake pads. When the clamp cylinder is fully compressed, remove the C-clamp.
2001 dodge neonGo ahead and slide the new brake pads. Remove the bungee cord and slide the rear brake caliper on the rotor. Bolt the rear caliper using the wrench. Take the rear wheel and slide it back to the center and securing nuts. Jack Dodge Ram and get the shots and clear the area. Close the brake fluid reservoir and then close the hood. Check the engine and the brakes do not feel well. Pump the brakes to remove air that has accumulated and to compress the brake pads to the distance from the rotor.
2001 Dodge
Sell Buy Cars
